logo                   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


2 Pages12>
Options
Go to last post Go to first unread
Offline Samsonthemad  
#1 Posted : Tuesday, June 11, 2013 8:54:39 AM(UTC)
Samsonthemad


Rank: Newbie

Reputation:

Groups: Registered
Joined: 6/10/2013(UTC)
Posts: 7

"Newbie here and I am looking for recommendations on what to buy.
Looking at PSII HC, not sure what I should use for heat source and what are good/recommended additions for the still.
Will most likely get the stainless steal filter funnel/column.
I can spend around $1000 Canadian Dollarydoos.

I still have lots of reading to do but I figure since it will take at least 2 months to receive once I have ordered that will give me some time.

Any thoughts?


Thanks,"
Offline dieselduo  
#2 Posted : Tuesday, June 11, 2013 9:03:28 AM(UTC)
dieselduo


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 1/24/2012(UTC)
Posts: 630

Thanks: 1 times
Was thanked: 13 time(s) in 13 post(s)
I like using water heater elements. They can put NPT fittings into kettle to screw in and you can get a router speed controller to control the heat. If you get bigger than an 8 gal I would also put a drain in it
Offline Samsonthemad  
#3 Posted : Tuesday, June 11, 2013 10:09:52 AM(UTC)
Samsonthemad


Rank: Newbie

Reputation:

Groups: Registered
Joined: 6/10/2013(UTC)
Posts: 7

I am looking at 8 Gal premium Kettle, would it be hard to to setup the WH elements and router speed control? I am technically savy so I can usually figure these things pretty good.
Offline scotty  
#4 Posted : Tuesday, June 11, 2013 11:08:35 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209

its a snap- most of us do it- do you have both a 110 volt and a 220 volt supply handy?? I have the 8 gallon and would like to have the 15 gallon boiler.
Offline Maddawgs  
#5 Posted : Wednesday, June 12, 2013 12:41:56 AM(UTC)
Maddawgs


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 9/14/2012(UTC)
Posts: 515

I would suggest the 15 gallon boiler. This will give you the option to do larger runs. With the 8 gallon you can only do smaller runs. With the 15 gallon I would suggest a drain.
Maddawgs
Offline RCRed  
#6 Posted : Wednesday, June 12, 2013 12:45:55 AM(UTC)
RCRed


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 11/15/2012(UTC)
Posts: 720

Was thanked: 11 time(s) in 11 post(s)
Originally Posted by: Maddawgs Go to Quoted Post
With the 15 gallon I would suggest a drain.
Maddawgs


I wish I'd had a drain installed in the 15 gallon one.. it's a PITA to lift that and drain the backset out - it can be very heavy to hoist and drain with 10 gals of backset left in there. Even three gallons is fairly hefty with that big ole kettle.
Offline Maddawgs  
#7 Posted : Wednesday, June 12, 2013 1:05:48 AM(UTC)
Maddawgs


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 9/14/2012(UTC)
Posts: 515

Originally Posted by: RoyseCityRed Go to Quoted Post
I wish I'd had a drain installed in the 15 gallon one.. it's a PITA to lift that and drain the backset out - it can be very heavy to hoist and drain with 10 gals of backset left in there. Even three gallons is fairly hefty with that big ole kettle.

Yup, I love my set up but wish I had got the drain. After the first time emptying the kettle I got an aquarium cleaning pump, works pretty good and gets all but the last few ounces.
Maddawgs
Offline RCRed  
#8 Posted : Wednesday, June 12, 2013 1:25:13 AM(UTC)
RCRed


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 11/15/2012(UTC)
Posts: 720

Was thanked: 11 time(s) in 11 post(s)
Originally Posted by: Maddawgs Go to Quoted Post
....... After the first time emptying the kettle I got an aquarium cleaning pump, works pretty good and gets all but the last few ounces.
Maddawgs
Damn.. more gear I need to go and get Cool
Offline Samsonthemad  
#9 Posted : Wednesday, June 12, 2013 4:23:17 AM(UTC)
Samsonthemad


Rank: Newbie

Reputation:

Groups: Registered
Joined: 6/10/2013(UTC)
Posts: 7

Scotty,

I currently only have 110v/15amp in the room for this but I may change the breaker for 220v/30amp.

I was thinking about the 15 Gallon but the fact that it is so heavy with liquids makes me not want to and I doubt I will ever run more than say 6 gallons at a time.
Perhaps I need to still consider it just incase.
Offline dieselduo  
#10 Posted : Wednesday, June 12, 2013 5:17:25 AM(UTC)
dieselduo


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 1/24/2012(UTC)
Posts: 630

Thanks: 1 times
Was thanked: 13 time(s) in 13 post(s)
if you go with the 8gal a 1650w element with a 20amp RSC will work fine
Offline scotty  
#11 Posted : Wednesday, June 12, 2013 7:06:09 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209

We use a pump to empty ours-- I have the one Brewhaus sells-- it works well. The 115 volts is fine. If you has 220, you would heat up with a prox. 6KW 220 volt element---then switch to applying 110 volts to it with a router speed control. Applying 110 volts to a 220 volt element changer its wattage to 1/4 of its rating. IE. 6000 watts at 220 volts would be 1500 watts if you applied 110 volts-- Capt. jack has a nice control to control just 220 volts.
Offline scotty  
#12 Posted : Wednesday, June 12, 2013 7:09:27 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209

"and I doubt I will ever run more than say 6 gallons " lol lol newbie-- how come some of us regret getting smaller boilers
Offline Samsonthemad  
#13 Posted : Wednesday, June 12, 2013 8:38:11 AM(UTC)
Samsonthemad


Rank: Newbie

Reputation:

Groups: Registered
Joined: 6/10/2013(UTC)
Posts: 7

"dieseldue,

That sounds like a good idea to me.
Thanks

So PSII HC comlpete distiller, 8 gallon premium kettle, electric thermo, copper mesh packing.
WH element 1650watt and NPT fiiting, and speed control.
Stainless Filter.

What other additions are going to be good for me?
(already have lots of fermentation equipment as I make beer at home)

Thanks,
Sam"
Offline Samsonthemad  
#14 Posted : Wednesday, June 12, 2013 9:58:25 AM(UTC)
Samsonthemad


Rank: Newbie

Reputation:

Groups: Registered
Joined: 6/10/2013(UTC)
Posts: 7

Originally Posted by: scotty Go to Quoted Post
"and I doubt I will ever run more than say 6 gallons " lol lol newbie-- how come some of us regret getting smaller boilers


I know Tongue
I am just already setup for 5 gallons with all my fermentation equipment, also want to be able to buy all the essentials with what I have to spend.
Offline Samsonthemad  
#15 Posted : Wednesday, June 12, 2013 10:19:48 AM(UTC)
Samsonthemad


Rank: Newbie

Reputation:

Groups: Registered
Joined: 6/10/2013(UTC)
Posts: 7

"So if I was to use this : Camco 02482/02483 1650W 120V Screw-In Water Heater Element - High Watt Density
That what I am looking at if for WH element I go 8gallon?"
Offline dieselduo  
#16 Posted : Wednesday, June 12, 2013 10:35:12 AM(UTC)
dieselduo


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 1/24/2012(UTC)
Posts: 630

Thanks: 1 times
Was thanked: 13 time(s) in 13 post(s)
that should do it if it's long enough. I got mine from lowes for about the same price but they had 2 one short and one long. The longer one reached about 3/4 of the way across the pot
Offline kane  
#17 Posted : Wednesday, June 12, 2013 12:26:10 PM(UTC)
kane


Rank: Junior Member

Reputation:

Groups: Registered
Joined: 6/11/2013(UTC)
Posts: 134

Was thanked: 1 time(s) in 1 post(s)
does lowes have the controllers as well ?
Offline dieselduo  
#18 Posted : Wednesday, June 12, 2013 12:39:26 PM(UTC)
dieselduo


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 1/24/2012(UTC)
Posts: 630

Thanks: 1 times
Was thanked: 13 time(s) in 13 post(s)
mine only had 15 amp but you never know Try this http://www.amazon.com/ML...rds=router+speed+control works good
Offline kane  
#19 Posted : Wednesday, June 12, 2013 1:19:33 PM(UTC)
kane


Rank: Junior Member

Reputation:

Groups: Registered
Joined: 6/11/2013(UTC)
Posts: 134

Was thanked: 1 time(s) in 1 post(s)
i will look around local and see what i can find / what about a dimmer switch
Offline RCRed  
#20 Posted : Wednesday, June 12, 2013 2:11:45 PM(UTC)
RCRed


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 11/15/2012(UTC)
Posts: 720

Was thanked: 11 time(s) in 11 post(s)
Originally Posted by: kane Go to Quoted Post
i will look around local and see what i can find / what about a dimmer switch
Hi Kane

I was pretty sure either Lowes or Home Creepo websites had a volatage RSC's already built-but they are really limited. - I opted in a differnt direction myself so I did not pursue...

There are some pre-builds on ebay;

http://www.ebay.com/sch/...nkw=router+speed+control
Users browsing this topic
Guest (9)
2 Pages12>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.