 Rank: Junior Member Groups: Registered
Joined: 7/16/2010(UTC)
Posts: 14
|
Hi everyone, I'm new to making spirits and would like to make a 100% rye recipe. My thinking is to mash in at 150 degrees with 1qt per lb of grain, and let it convert for 1-2 hours. At that point I would add cold water to get the temp down to 65 degrees and add beer yeast for a beer between 6-8 abv, then double with a pot still. I would then use medium toast chips for color & flavor. What do you think?
|
|
|
|
|
|
 Rank: Senior Member Groups: Registered
Joined: 10/22/2005(UTC)
Posts: 817
|
" Originally Posted by: starchild  Hi everyone, I'm new to making spirits and would like to make a 100% rye recipe. My thinking is to mash in at 150 degrees with 1qt per lb of grain, and let it convert for 1-2 hours. At that point I would add cold water to get the temp down to 65 degrees and add beer yeast for a beer between 6-8 abv, then double with a pot still. I would then use medium toast chips for color & flavor. What do you think? Will make an excellent whiskey. What most people don't realize is you have to have a roller mil or grinder to expose the inside of the grains to the gelatinizint and mash. I always made mine with dehulled rye grains so not as much tannins and so easy to run through my roller mill. Just a slight crack and not into a meal so easier rack at end of fermentation. Bit more expensive to buy, but without the hull, you need a lot less grains. Either way, with the chaff or dehulled the grain needs to be cracked or ground. You cannot get a good and proper mash otherwise. Barley Malt or package enzymes both work will, but are needed. Rye malt will work if you can find it."
|
|
|
|
|
|
Rank: Junior Member Groups: Registered
Joined: 7/16/2010(UTC)
Posts: 14
|
I'm a beer brewer for 25 yrs and have all the equipment. I just need to get the process down and get the recipes and aging together. I hear that 2 yr old rye is excellent. So that's what I aim to do.
|
|
|
|
|
|
Rank:: Senior Member Groups: Registered, Moderator
Joined: 4/14/2010(UTC)
Posts: 1,666
Was thanked: 15 time(s) in 15 post(s)
|
"I want to try some Rye whiskey before I make it. Does anyone know the name of a good rye whiskey. And just so ya know, ya gotta try the Crown Royal Black......I hope I can get close to that stuff.
Does Brewhaus sell rye for making mash??"
|
|
|
|
|
|
Rank: Junior Member Groups: Registered
Joined: 7/16/2010(UTC)
Posts: 14
|
There are lots of good rye's. Sazerac 6yr old is around $23. They call it baby Saz. Cuase they make an 18yro also. Some people like Rittenhouse around $16, they make an 80 & 100 proof. I really enjoyed Van Winkle Family Reserve Rye $35. Brewhaus sells flaked rye, but I'm going to use malted rye.
|
|
|
|
|
|
 Rank: Newbie Groups: Registered
Joined: 12/8/2010(UTC)
Posts: 8
|
OK I'm a total newb but it seems to me I've seen a rule of thumb of 2 lbs. of grain per gallon of water. Is this right? The reason I ask is that I have a relatively small stock pot so I have to make a concentrated mash and then add water in my fermenting bucket. But a quart of water per lb. of grain seems crazy high. What's the reasoning behind it?
|
|
|
|
|
|
Rank: Junior Member Groups: Registered
Joined: 7/16/2010(UTC)
Posts: 14
|
1.5 qts per lb is better. Otherwise it's too gummy if your using just rye.
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
