 Rank: Newbie Groups: Registered
Joined: 1/3/2014(UTC)
Posts: 1
|
I have been brewing beer and making meads for years now, and been curious about distilling. So iv'e been lurcking here and some other forums doing research for a few months now. This seemed to be the friendliest forum i've came across so I would say hi and ask a question. So I pulled the trigger and ordered a PSII last week, got the 1in npt added to the boiler, ferrule added to top of column to get rid of the rubber bung, and got an extended liebig condenser. I got the parts to make my controller on the way. I'm torn on what size element for the 8 gallon boiler. I'm set up for 220v leaning towards a 3500w ULD. Any recommendations to what size element would be best for this set up?
|
|
|
|
|
|
 Rank: Senior Member Groups: Registered
Joined: 1/24/2012(UTC)
Posts: 630
Thanks: 1 times
Was thanked: 13 time(s) in 13 post(s)
|
for an 8 gal a 110- 1650 heater element with a 20 amp RSC will work just fine
|
|
|
|
|
|
Rank: Senior Member Groups: Registered
Joined: 1/12/2012(UTC)
Posts: 804
Was thanked: 5 time(s) in 5 post(s)
|
"Hi Iceman, Welcom to the forum! Quote:I have been brewing beer and making meads for years now That's great experience to have. I may be bothering you with questions about beer/mead from time to time! Quote:This seemed to be the friendliest forum i've came across This is by far the friendliest forum that I've found as well ... a great group of true gentlemen and ladies here that are very helpful and patient. Best Regards, --JB"
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
