logo                   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
Has anyone cnverted a brewhouse boiler to electric.
Options
Go to last post Go to first unread
Previous Topic Next Topic
Offline scotty  
#1 Posted : Monday, August 23, 2010 1:00:22 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209
"I am in the middle of a mile high nightmare right now. I sent my 6.5 gallon boiler out to have a 1 inch NPT coupling welded to it in order that i might be able to install an internal electric heat element.

The MH boiler develops hair line cracks no mater how the heat is applied. Its not working.
I have read that the MH boilers are made from milk cans that are not intended for welding.
I like the new Brewhaus boilers and will gladly switch to one now if i can get the coupling welded to it.

Any input please.BigGrin"
Back to top
Offline admin  
#2 Posted : Monday, August 23, 2010 1:11:01 AM(UTC)
admin


Rank: Administration

Reputation:

Groups: Administrators
Joined: 2/10/2002(UTC)
Posts: 501

Was thanked: 8 time(s) in 8 post(s)
We will contact you off list to take care of this for you.
Back to top
Offline scotty  
#3 Posted : Monday, August 23, 2010 4:21:40 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209
"
Originally Posted by: scotty Go to Quoted Post
I am in the middle of a mile high nightmare right now. I sent my 6.5 gallon boiler out to have a 1 inch NPT coupling welded to it in order that i might be able to install an internal electric heat element.

The MH boiler develops hair line cracks no mater how the heat is applied. Its not working.
I have read that the MH boilers are made from milk cans that are not intended for welding.
I like the new Brewhaus boilers and will gladly switch to one now if i can get the coupling welded to it.

Any input please.BigGrin



ok I am in contact with Brewhaus and they will do the modification that i need.


[SIZE=""6""]THANKS BREWHAUS[/SIZE]





A gratefull
Scotty
[email]slowpoke59ds
yahoo.com[/email]"
Back to top
Offline Bayou-Ruler  
#4 Posted : Monday, August 23, 2010 1:57:22 PM(UTC)
Bayou-Ruler


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 6/4/2010(UTC)
Posts: 360
Man
United States
Location: Louisiana
"
Originally Posted by: scotty Go to Quoted Post
ok I am in contact with Brewhaus and they will do the modification that i need.


[SIZE=""6""]THANKS BREWHAUS[/SIZE]





A gratefull
Scotty
[email]slowpoke59ds
yahoo.com[/email]


[SIZE=""4""]One thing for sure Rick and his staff are top notch! [/SIZE]"
Bayou Ethanol
AFP-LA-15027
www.bayouethanol.com
Back to top
WWW Google+
Offline admin  
#5 Posted : Monday, August 23, 2010 3:04:37 PM(UTC)
admin


Rank: Administration

Reputation:

Groups: Administrators
Joined: 2/10/2002(UTC)
Posts: 501

Was thanked: 8 time(s) in 8 post(s)
Thank you for the pat on the back. I will pass it along to those who deserve it.
Back to top
Offline scotty  
#6 Posted : Tuesday, August 24, 2010 1:21:24 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209
"
Originally Posted by: Admin Go to Quoted Post
Thank you for the pat on the back. I will pass it along to those who deserve it.




You deserve it for your helpfull attitude. Its awfull how business treat customers these days."
Back to top
Offline scotty  
#7 Posted : Friday, August 27, 2010 1:07:52 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209
"The new brewhaus premium boiler is in transit
to me now. Complete with 1 in NPT fitting installed. Its a pitty that i always insulate my boiler. I will be covering up that pretty etching on the unit.


In the meantime, my welder used silver solder to attach the 1 in. NPT coupling to my mile hi 6.5 boiler. The solder wouldnt tin but its attached. I used JB WELD to finish off and strengthen the installation.

Just as a note, 2 years back i had a thermo well installed but we put it through
the top of the boiler which is actually the bottom of
one of the 2 milk cans used to construct the unit. The tube
went in and the weld
was perfect. I guess the base
may be a bit
heavier than the sides.

At any
rate we replaced the insulation that i had cut
away to allow for the coupling installation and added a third layer of insulation while we were at it. I have a little more
aliminum tape to ad so that everything stays in place. I will test the unit later. I have 2 ---
7 gallon batches of wash to run for vodka.

I am anxious to try my variac and internal heat element.



ill get some pictures later.

BigGrin
scotty"
Back to top
Offline scotty  
#8 Posted : Friday, August 27, 2010 8:26:35 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209
"Here is the thermowell that was installed 2 years back in th top of the boiler

UserPostedImage

Side view with thermowell and extra insulation

UserPostedImage

Here is the coupling with the 1650W/120volt element installed

UserPostedImage

It should be fine with the JB WELD to compensate for the silver soldering that i was not sure of.

Now ill have 2 still if this proves sound.

one thing for sure, it has enough insulation((3 layers."
Back to top
Offline scotty  
#9 Posted : Saturday, August 28, 2010 2:00:15 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209
"I have the basic wiring done. I didnt install the plug because i got cheap and to save 1 dollar, i purchased a plug for wire smaller than #12. Ill go to home depot later and fix that. Probably wasted 3 dollars in gas lol smart ass.

The boiler does not have a place to connect the grounding conductor so i stole 6 inches of green wire from near the heat element. The green tie wraps are just to put th insulation back ove the spot that i stole the wire from.

UserPostedImage

This is where i used the extra green wire. i will drill into the handle so i can install a bolt to which the grounding conductor can be attached. now it will be connected to the supply circuit

UserPostedImage

i will do the same to the brewhaus boiler when it arrives"
Back to top
Offline Skyty  
#10 Posted : Tuesday, December 24, 2013 5:06:43 AM(UTC)
Skyty


Rank: Newbie

Reputation:

Groups: Registered
Joined: 12/20/2013(UTC)
Posts: 1
Originally Posted by: scotty Go to Quoted Post
I have the basic wiring done. I didnt install the plug because i got cheap and to save 1 dollar, i purchased a plug for wire smaller than #12. Ill go to home depot later and fix that. Probably wasted 3 dollars in gas lol smart ass.

The boiler does not have a place to connect the grounding conductor so i stole 6 inches of green wire from near the heat element. The green tie wraps are just to put th insulation back ove the spot that i stole the wire from.

UserPostedImage

This is where i used the extra green wire. i will drill into the handle so i can install a bolt to which the grounding conductor can be attached. now it will be connected to the supply circuit

UserPostedImage

i will do the same to the brewhaus boiler when it arrives


How has this been working for you? I would be interested in doing this to
Back to top
Offline scotty  
#11 Posted : Tuesday, December 24, 2013 9:02:10 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209
I don't use the boiler any more but I did use it a few times and it worked ok. I have the 8 gallon premium and want a 15 gallon premium soon. Don't do the stupid thing that I did to ground the green wire, Just take a stainless radiator hose clamp and clamp the green wire to the 1 inch npt coupling

UserPostedImage
Back to top
Offline scotty  
#12 Posted : Tuesday, December 24, 2013 9:20:18 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209
I also installed some heat elements into my boil and sparge pots.

1 inch NPT coupling + 1 inch NPT threaded union. Get the shortest one you can. Then get a few stainless washers that fit over the threads. Also get some red rubber O rings and some silicone. Lots of hard work. I had to re do mine a few times---- But as far as my boiler is concerned. I had Brewhaus weld mine in place when I purchased the boiler.


UserPostedImage

UserPostedImage

UserPostedImage
Back to top
Offline div4gold  
#13 Posted : Friday, December 27, 2013 5:25:52 AM(UTC)
div4gold


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 1/16/2010(UTC)
Posts: 453
How long does it take to heat up the boiler with the 1650 watt internal element?
Back to top
Offline dieselduo  
#14 Posted : Friday, December 27, 2013 5:33:52 AM(UTC)
dieselduo


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 1/24/2012(UTC)
Posts: 630

Thanks: 1 times
Was thanked: 13 time(s) in 13 post(s)
for an 8 gal about 40 to 45 min
Back to top
Offline div4gold  
#15 Posted : Friday, December 27, 2013 6:18:31 AM(UTC)
div4gold


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 1/16/2010(UTC)
Posts: 453
Well that makes it worth while. What do you use the stainless washers for? So if I sent my boiler to Brewhaus they could weld the fitting for the heating element in place? Thanks for the info hds
Back to top
Offline dieselduo  
#16 Posted : Friday, December 27, 2013 6:41:34 AM(UTC)
dieselduo


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 1/24/2012(UTC)
Posts: 630

Thanks: 1 times
Was thanked: 13 time(s) in 13 post(s)
I would think they would. Give Rick a call
Back to top
Offline scotty  
#17 Posted : Friday, December 27, 2013 9:46:16 AM(UTC)
scotty


Rank: Senior Member

Reputation:

Groups: Registered, Moderator
Joined: 7/25/2009(UTC)
Posts: 2,209
The washers are for spacing when I install a coupling that is not welded ; but are NOT used in a welded fitting
Back to top
Offline dieselduo  
#18 Posted : Friday, December 27, 2013 9:52:12 AM(UTC)
dieselduo


Rank: Senior Member

Reputation:

Groups: Registered
Joined: 1/24/2012(UTC)
Posts: 630

Thanks: 1 times
Was thanked: 13 time(s) in 13 post(s)
thanx for the clarification scotty. I couldn't figure out why you would need any
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.108 seconds.